Accessories

E/P positioners SIPART PS2

E/P positioners SIPART PS2

E/P positioners are equipment which convert electric analogue or digital signal to pneumatic pressure which can drive pneumatic actuator. By this we can obtain required position of pneumatic actuator consequently of valve. Manual integrated feedback of E/P positioner provide exactly information about position of pneumatic actuator. If actual position of actuator is different to input signal (analog or digital), microcontroller of E/P positioner Sipart PS2 provides correct position. Input signal: analog 0/4...20mA, HART, PROFIBUS PA, FOUNDATION Fieldbus (FF) For non-hazardous applications or hazardous applications with protection intrinsic safety "Ex i", protection enclosure "Ex d" in flameproof aluminium enclosure Output signal: analog feedback 4...20mA (Iy module ), Alarm unit (3 outputs, 1 input), Limit signaling through slot-type initiators (SIA module), Mechanical limit switch module (limit value contact module), pneumatic valve manifold and etc.

Fittings with PFA lining

Fittings with PFA lining

Dimension
DIN - ANSI
Nominal pressure DIN
Nominal pressure ANSI
Material
Service
Connection
Temperature range
DN 15 - 1/2"
DN 300 - 12"
PN 6, PN 10, PN 16 150 WCB, CF8M chemical, petrochemical, hazardous substances Flanged - 196 ÷ 200

Flanges, elbows 90, 60, 45 and 30°, tees, reducing tees, crosses, concentric and eccentric reducers, spacers, blind flanges and etc. for lined pipes and fittings

Inductive proximity switches IFM, IS5001

Inductive proximity switches IFM, IS5001

Producer - IFM // Switch type - IS5001 (PNP N.O.) // Voltage - 10 - 36V DC // Max. current - 0-200mA // Frequency - 800Hz // No load sup. current - 15mA // Output indicator - LED yellow // Enclosure switch - IP67 // Temperature - -25°C ... +80°C

Inductive proximity switches Turck, Bi2-Q10S-AP6X

Inductive proximity switches Turck, Bi2-Q10S-AP6X

Producer - Turck // Switch type - Bi2-Q10S-AP6X (PNP N.O.) // Voltage - 10 - 30V DC // Max. current - 15-150mA // Frequency - 2000 Hz // No load sup. current - 15mA // Output indicator - LED žlutá // Enclosure switch - IP67 // Temperature - -25°C ... +70°C